Genesol 61

Neutral pH Membrane Cleaner

Genesol 61 is a neutral pH cleaner ideally suited for the removal of organic & inorganic foulants from Reverse Osmosis and Nano-filtration membrane surfaces, particularly where the use of low & high pH cleaners may be limited due to Health and Safety or effluent disposal restrictions. The neutral pH of this product makes it particularly useful for cleaning cellulose acetate membranes.

Genesys 61 documentation

Please login to access the content on this site. Not registered? Click here to register.

Membrane Cleaning Wizard

You can use our Membrane Cleaning Wizard to help you work out the best way to clean a reverse osmosis membrane.

Related Products

Below you will find information about our featured products. If you can’t find the product you are looking for, please Contact Us.

Antiscalants

Genesys BS

Genesys BS has been developed as an antiscalant for use in RO and NF systems using natural and process feed-waters with particularly high levels of barium sulphate and calcium carbonate. It is also effective against other common scaling species.

Genesys CAS

Genesys CAS is an antiscalant for use in RO and NF systems operating with feed-waters containing high levels of Calcium sulphate. Genesys CAS is also effective against Calcium carbonate and other commonly found scaling species. Feed water source: Sea & Brackish water

Genesys MG

Genesys MG is an antiscalant for use in RO and NF systems with waters having a high magnesium content but is effective against calcium carbonate too. Feed water source: Sea water

Cleaners

Genesol UF Fe

Genesol UF Fe is a low pH cleaner formulated to remove Iron and Manganese fouling from UF membranes, especially in SWRO applications.

Genesol UF 2

Genesol UF 2 is a low foaming, multicomponent, acidic, UF membrane cleaner formulated with Osmotic Action to remove carbonate scales and metal oxides.

Genesol UF 12

Genesol UF12 is an effervescent, alkaline, detergent, U.F. Membrane cleaner formulated with osmotic action to remove difficult biofouling, metals and organic deposits.

Ancillary products

Genesol 30

Genesol 30 is a fast acting, broad-spectrum biocide used for cleaning RO and NF membranes. It can be used both on and off-line to eliminate microbiological fouling.

Genesol 32

Genesol 32 is a broad spectrum biocide for use in cleaning RO and NF systems and can be used in pre-treatment systems for the prevention of biofouling in pumps, tanks and pipe-work.

Genefloc GPF

Genefloc GPF is a general-purpose flocculant for use in surface, well and process waters with medium to high Silt Density Index (SDI) values and does not foul membranes like conventional iron and aluminium based coagulants.