An H2O Innovation Company

Genefloc GPF

Membrane Compatible Flocculant

To minimise membrane fouling and reduce cleaning frequency the silt density index (SDI) should be kept as low as possible. Genefloc GPF can be used to improve the performance of filtration equipment and has been developed as a general-purpose flocculant for use in surface, well and process waters with medium to high SDI values. Genefloc GPF is compatible with polyamide membranes and does not foul membranes like conventional iron and aluminium based coagulants.

Genefloc GPF documentation

Please login to access the content on this site. Not registered? Click here to register.

Membrane Autopsy

We always recommend a membrane autopsy to ensure deposits are correctly identified and to design a tailored cleaning protocol.

Related Products

Below you will find information about our featured products. If you can’t find the product you are looking for, please Contact Us.

Antiscalants

Genesys BS

Genesys BS has been developed as an antiscalant for use in RO and NF systems using natural and process feed-waters with particularly high levels of barium sulphate and calcium carbonate. It is also effective against other common scaling species.

Genesys SI

Genesys SI is an antifoulant for use in RO and NF systems operating on high silica feed waters and is also effective against all common scale forming salts. Feed water source: Brackish water

Genesys SW

Genesys SW is a broad spectrum, phosphorous free antiscalant for use in seawater RO and NF systems. It is highly effective at preventing the formation of inorganic scale. Feed water source: Sea water

Cleaners

Genesol UF Fe

Genesol UF Fe is a low pH cleaner formulated to remove Iron and Manganese fouling from UF membranes, especially in SWRO applications.

Genesol UF 2

Genesol UF 2 is a low foaming, multicomponent, acidic, UF membrane cleaner formulated with Osmotic Action to remove carbonate scales and metal oxides.

Genesol UF 12

Genesol UF12 is an effervescent, alkaline, detergent, U.F. Membrane cleaner formulated with osmotic action to remove difficult biofouling, metals and organic deposits.

Ancillary products

Genesol 30

Genesol 30 is a fast acting, broad-spectrum biocide used for cleaning RO and NF membranes. It can be used both on and off-line to eliminate microbiological fouling.

Genesol 32

Genesol 32 is a broad spectrum biocide for use in cleaning RO and NF systems and can be used in pre-treatment systems for the prevention of biofouling in pumps, tanks and pipe-work.

Genefloc GPF

Genefloc GPF is a general-purpose flocculant for use in surface, well and process waters with medium to high Silt Density Index (SDI) values and does not foul membranes like conventional iron and aluminium based coagulants.