Genesol 38

Acidic Membrane Cleaner

Genesol 38 is an inorganic scale cleaner and iron deposit remover for use in RO and NF membrane systems and has been approved for use in drinking water applications. Used at the right concentration, its self adjusting pH ensures highest solubility of iron salts is achieved.

Genesys 38 documentation

Please specify the country and language in your SDS request form.

If you are a Genesys distributor, please login to access the content on this site. Not registered? Click here to register.

Membrane Cleaning Wizard

You can use our Membrane Cleaning Wizard to help you work out the best way to clean a reverse osmosis membrane.

Related Products

Below you will find information about our featured products. If you can’t find the product you are looking for, please Contact Us.

Antiscalants

Genesys SI

Genesys SI is an antifoulant for use in RO and NF systems operating on high silica feed waters and is also effective against all common scale forming salts. Feed water source: Brackish water

Genesys BS

Genesys BS has been developed as an antiscalant for use in RO and NF systems using natural and process feed-waters with particularly high levels of barium sulphate and calcium carbonate. It is also effective against other common scaling species.

Genesys PHO

Genesys PHO has been developed specifically to prevent calcium phosphate and calcium carbonate scaling in RO and NF systems. It permits system operation at higher pH and recovery than other antiscalants. Feed water source: Brackish water

Cleaners

Genesol UF Fe

Genesol UF Fe is a low pH cleaner formulated to remove Iron and Manganese fouling from UF membranes, especially in SWRO applications.

Genesol UF 2

Genesol UF 2 is a low foaming, multicomponent, acidic, UF membrane cleaner formulated with Osmotic Action to remove carbonate scales and metal oxides.

Genesol UF 12

Genesol UF12 is an effervescent, alkaline, detergent, U.F. Membrane cleaner formulated with osmotic action to remove difficult biofouling, metals and organic deposits.

Ancillary products

Genesol 30

Genesol 30 is a fast acting, broad-spectrum biocide used for cleaning RO and NF membranes. It can be used both on and off-line to eliminate microbiological fouling.

Genesol 32

Genesol 32 is a broad spectrum biocide for use in cleaning RO and NF systems and can be used in pre-treatment systems for the prevention of biofouling in pumps, tanks and pipe-work.

Genefloc GPF

Genefloc GPF is a general-purpose flocculant for use in surface, well and process waters with medium to high Silt Density Index (SDI) values and does not foul membranes like conventional iron and aluminium based coagulants.