Genesys MG

Magnesium Hydroxide Antiscalant

Genesys MG has been developed as an antiscalant for use in Reverse Osmosis and Nano-Filtration systems with waters having a high magnesium content but is effective against calcium carbonate too. Magnesium hydroxide fouling is not normally a problem in membrane systems because operating pH and temperatures are usually outside the levels where magnesium hydroxide forms. However new applications, involving pH correction to enhance the rejection of boron, are becoming more commonplace and Genesys MG has been developed specifically for use in this technology. Genesys MG is particularly effective in second pass recovery systems working at 80-90% recovery with an adjusted feed pH of 10.0– 10.5.

Genesys MG documentation

Please specify the country and language in your SDS request form.

If you are a Genesys distributor, please login to access the content on this site. Not registered? Click here to register.

Membrane Master^®

You can use our Membrane Master scaling prediction program to identify the type of scale that could affect your plant and discover a suitable antiscalant.

Related Products

Below you will find information about our featured products. If you can’t find the product you are looking for, please Contact Us.

Antiscalants

Genesys LS

Genesys LS is a broad spectrum, low phosphorous antiscalant for use in potable sea-water RO and NF systems, both large and small. By inhibiting all scaling species, it allows systems to be designed and operated at high rates of recovery. Feed water source: Sea water

Genesys SW

Genesys SW is a broad spectrum, phosphorous free antiscalant for use in seawater RO and NF systems. It is highly effective at preventing the formation of inorganic scale. Feed water source: Sea water

Genesys LF

Genesys LF is a general purpose liquid antiscalant & antifoulant for use in RO and NF systems. This concentrated phosphonate product is effective against a wide range of inorganic scaling species and also sequesters trivalent metal cations. Feed water source: Sea & Brackish water

Cleaners

Genesol UF Fe

Genesol UF Fe is a low pH cleaner formulated to remove Iron and Manganese fouling from UF membranes, especially in SWRO applications.

Genesol UF 2

Genesol UF 2 is a low foaming, multicomponent, acidic, UF membrane cleaner formulated with Osmotic Action to remove carbonate scales and metal oxides.

Genesol UF 12

Genesol UF12 is an effervescent, alkaline, detergent, U.F. Membrane cleaner formulated with osmotic action to remove difficult biofouling, metals and organic deposits.

Ancillary products

Genesol 30

Genesol 30 is a fast acting, broad-spectrum biocide used for cleaning RO and NF membranes. It can be used both on and off-line to eliminate microbiological fouling.

Genesol 32

Genesol 32 is a broad spectrum biocide for use in cleaning RO and NF systems and can be used in pre-treatment systems for the prevention of biofouling in pumps, tanks and pipe-work.

Genefloc GPF

Genefloc GPF is a general-purpose flocculant for use in surface, well and process waters with medium to high Silt Density Index (SDI) values and does not foul membranes like conventional iron and aluminium based coagulants.