Genesol 30

Membrane Biocide

Genesol 30 is a fast acting, broad-spectrum biocide used for cleaning Reverse Osmosis and Nano-Filtration membranes. It can be used both on and off-line to eliminate microbiological fouling. When used in potable water applications, Genesol 30 should be used ‘off-line’. Genesol 30 is also effective in removing biofilm from pumps, tanks and pipe-work. Best results are obtained when Genesol 30 is used at a pH 5.5 – 7.0. Residual Genesol 30 can be deactivated to harmless byproducts by using sodium bisulphite. Genesol 30 is readily biodegradable in the environment; the degradation rate is enhanced at increasing pH and temperature.

Genesys 30 documentation

Please specify the country and language in your SDS request form.

If you are a Genesys distributor, please login to access the content on this site. Not registered? Click here to register.

Membrane Autopsy

We always recommend a membrane autopsy to ensure deposits are correctly identified and to design a tailored cleaning protocol.

Related Products

Below you will find information about our featured products. If you can’t find the product you are looking for, please Contact Us.

Antiscalants

Genesys PHO

Genesys PHO has been developed specifically to prevent calcium phosphate and calcium carbonate scaling in RO and NF systems. It permits system operation at higher pH and recovery than other antiscalants. Feed water source: Brackish water

Genesys CAS

Genesys CAS is an antiscalant for use in RO and NF systems operating with feed-waters containing high levels of Calcium sulphate. Genesys CAS is also effective against Calcium carbonate and other commonly found scaling species. Feed water source: Sea & Brackish water

Genesys LS

Genesys LS is a broad spectrum, low phosphorous antiscalant for use in potable sea-water RO and NF systems, both large and small. By inhibiting all scaling species, it allows systems to be designed and operated at high rates of recovery. Feed water source: Sea water

Cleaners

Genesol UF Fe

Genesol UF Fe is a low pH cleaner formulated to remove Iron and Manganese fouling from UF membranes, especially in SWRO applications.

Genesol UF 2

Genesol UF 2 is a low foaming, multicomponent, acidic, UF membrane cleaner formulated with Osmotic Action to remove carbonate scales and metal oxides.

Genesol UF 12

Genesol UF12 is an effervescent, alkaline, detergent, U.F. Membrane cleaner formulated with osmotic action to remove difficult biofouling, metals and organic deposits.

Ancillary products

Genesol 30

Genesol 30 is a fast acting, broad-spectrum biocide used for cleaning RO and NF membranes. It can be used both on and off-line to eliminate microbiological fouling.

Genesol 32

Genesol 32 is a broad spectrum biocide for use in cleaning RO and NF systems and can be used in pre-treatment systems for the prevention of biofouling in pumps, tanks and pipe-work.

Genefloc GPF

Genefloc GPF is a general-purpose flocculant for use in surface, well and process waters with medium to high Silt Density Index (SDI) values and does not foul membranes like conventional iron and aluminium based coagulants.