Genefloc ABF

Combined Algaecide, Biocide & Flocculant

Genefloc ABF is designed to act as a combined biocide and flocculant, reducing the effects of colloids, bacteria and alga on membrane systems. It is a low molecular weight flocculant for use in surface, well and process waters of medium to high SDI. Genefloc ABF is designed specifically for use in feed waters susceptible to algal growth such as open reservoirs and ponds.

Genefloc ABF documentation

If you are a Genesys distributor, please login to access the content on this site. Not registered? Click here to register.

To request this product’s SDS, please fill this request form.

Membrane Autopsy

We always recommend a membrane autopsy to ensure deposits are correctly identified and to design a tailored cleaning protocol.

Related Products

Below you will find information about our featured products. If you can’t find the product you are looking for, please Contact Us.

Antiscalants

Genesys MG

Genesys MG is an antiscalant for use in RO and NF systems with waters having a high magnesium content but is effective against calcium carbonate too. Feed water source: Sea water

Genesys SI

Genesys SI is an antifoulant for use in RO and NF systems operating on high silica feed waters and is also effective against all common scale forming salts. Feed water source: Brackish water

Genesys PHO

Genesys PHO has been developed specifically to prevent calcium phosphate and calcium carbonate scaling in RO and NF systems. It permits system operation at higher pH and recovery than other antiscalants. Feed water source: Brackish water

Cleaners

Genesol UF Fe

Genesol UF Fe is a low pH cleaner formulated to remove Iron and Manganese fouling from UF membranes, especially in SWRO applications.

Genesol UF 2

Genesol UF 2 is a low foaming, multicomponent, acidic, UF membrane cleaner formulated with Osmotic Action to remove carbonate scales and metal oxides.

Genesol UF 12

Genesol UF12 is an effervescent, alkaline, detergent, U.F. Membrane cleaner formulated with osmotic action to remove difficult biofouling, metals and organic deposits.

Ancillary products

Genesol 30

Genesol 30 is a fast acting, broad-spectrum biocide used for cleaning RO and NF membranes. It can be used both on and off-line to eliminate microbiological fouling.

Genesol 32

Genesol 32 is a broad spectrum biocide for use in cleaning RO and NF systems and can be used in pre-treatment systems for the prevention of biofouling in pumps, tanks and pipe-work.

Genefloc GPF

Genefloc GPF is a general-purpose flocculant for use in surface, well and process waters with medium to high Silt Density Index (SDI) values and does not foul membranes like conventional iron and aluminium based coagulants.