Genesol 36

Alkaline Chelant Cleaner

Genesol 36 is a general purpose cleaner for the removal of organic foulants found on RO and NF membrane surfaces. The low dose rate of Genesol 36 ensures cost effective use and it is an excellent adjunct when used in combination with other Genesol membrane cleaners.

Genesys 36 documentation

If you are a Genesys distributor, please login to access the content on this site. Not registered? Click here to register.

To request this product’s SDS, please fill this request form.

Membrane Cleaning Wizard

You can use our Membrane Cleaning Wizard to help you work out the best way to clean a reverse osmosis membrane.

Related Products

Below you will find information about our featured products. If you can’t find the product you are looking for, please Contact Us.

Antiscalants

Genesys LF

Genesys LF is a general purpose liquid antiscalant & antifoulant for use in RO and NF systems. This concentrated phosphonate product is effective against a wide range of inorganic scaling species and also sequesters trivalent metal cations. Feed water source: Sea & Brackish water

Genesys SI

Genesys SI is an antifoulant for use in RO and NF systems operating on high silica feed waters and is also effective against all common scale forming salts. Feed water source: Brackish water

Genesys CAS

Genesys CAS is an antiscalant for use in RO and NF systems operating with feed-waters containing high levels of Calcium sulphate. Genesys CAS is also effective against Calcium carbonate and other commonly found scaling species. Feed water source: Sea & Brackish water

Cleaners

Genesol UF Fe

Genesol UF Fe is a low pH cleaner formulated to remove Iron and Manganese fouling from UF membranes, especially in SWRO applications.

Genesol UF 2

Genesol UF 2 is a low foaming, multicomponent, acidic, UF membrane cleaner formulated with Osmotic Action to remove carbonate scales and metal oxides.

Genesol UF 12

Genesol UF12 is an effervescent, alkaline, detergent, U.F. Membrane cleaner formulated with osmotic action to remove difficult biofouling, metals and organic deposits.

Ancillary products

Genesol 30

Genesol 30 is a fast acting, broad-spectrum biocide used for cleaning RO and NF membranes. It can be used both on and off-line to eliminate microbiological fouling.

Genesol 32

Genesol 32 is a broad spectrum biocide for use in cleaning RO and NF systems and can be used in pre-treatment systems for the prevention of biofouling in pumps, tanks and pipe-work.

Genefloc GPF

Genefloc GPF is a general-purpose flocculant for use in surface, well and process waters with medium to high Silt Density Index (SDI) values and does not foul membranes like conventional iron and aluminium based coagulants.